INSTALLATION INSTRUCTIONS
HRM100
C
Universal Headrest Mount for VMA6491/VMA7191
The HRM100 is engineered to be installed into factory headrests while retaining the factory cosmet-
ics. It is designed to fit Clarion monitors (VMA6491 or VMA7191) for rear passenger entertainment.
Please follow the directions carefully.
Clarion Monitor Headrest Shroud Preparation
1. Remove the headrest from the vehicle.
2. Using scissors, cut along the dotted lines of the provided headrest template.
Note: Lay the template on headrest or seatback and verify fit and size.
Make sure you verify the fit before proceding to the next step.
3. Lay the template on the headrest or seatback. Carefully mark the cutout opening onto the
headrest. Using a sharp utility knife, carefully cut the bezel opening and remove the material.
Note: Carefully remove the foam and locate the metal headrest supports.
4. Carefully cut an access hole for the video and power cables on the bottom of the headrest.
5. Locate the metal headrest supports and insert the tie straps around the metal supports on all four
corners.
6. Slide the tie straps through the bezel openings. Once all tie straps are through the bezel, gently
adjust tie straps one at time until headrest bezel is secured onto the headrest.
Pre-Wiring of the Monitor
1. Carefully run the video and power connections up the seat back and make an access hole on the
top portion of the seatback.
Seat Re-assembly
1. Re-install the headrest onto seatback.
Note: Do not re-install completely
2. Run the video and power cables from seatback
opening into the headrest wiring opening.
Monitor Wiring and Mounting
1. Insert the spacer into headrest bezel.
2. Connect the video and power connections
from the bezel to the monitor.
3. Test the monitor for functionality before
proceeding to the next step.
3. Carefully tuck the cables into the headrest bezel.
4. Gently press the monitor into place until it is flush
with the bezel
5. From the underside, through the access hole,
carefully insert provided bolt and secure the
monitor into place.
Important Note
HRM100 is intended for rear passenger entertainment only.
Clarion Corporation of America, Gardena, CA
|