MODEL
CH3083
8 - DISC CD CHANGER
OWNER'S MANUAL
We appreciate your purchase of this product.
Please read through this manual for correct operation.
We suggest that after reading it you keep this manual
in a safe place for future reference.
Warning
Do not place the vinyl storage bag over a person. It may
cause a serious accident or death by suffocation.
•
•
•
Do not disassemble or rebuild this product. Doing so may
cause an accident, fire or electrical shock.
When it is necessary to replace the fuse, always use a fuse of
the correct rating (number of amperes). Use of fuses with
higher amperage ratings may cause a fire.
Do not operate the product in a malfunctioning condition, for
instance, when the audio does not play. Doing so may result
in an accident, fire or electrical shock.
•
•
If an abnormal situation occurs, such as foreign matter
entering or liquid splashing on the product, or smoke or a
strange odor emitting from the unit, shut off the product
immediately and consult the dealer from whom you purchased
it. Continued operation may cause an accident, fire or
electrical shock.
Do not install this product in locations where it may interfere
with the operation of the steering wheel, shift lever, brake
pedal, etc. Otherwise, an accident or injury may result.
•
•
To prevent damaging the vehicle, confirm the locations of
hoses, electrical wiring, and the fuel tank prior to drilling holes
to install this product. Also, take care so that the product does
not interfere, nor come in contact with them. Otherwise, a fire
may result.
When installing this product, never use the existing nuts or
bolts that secure parts of the fuel tank, or the steering or
braking system. Otherwise, improper steering or braking or a
fire may result.
•
3
Warning
To prevent a short circuit from occuring, disconnect the
battery's negative terminal before installing this product.
Otherwise, an electric shock or injury may result
•
•
When using an existing nut and/or bolt from the vehicle to
ground this product, do not use any that secure parts of the
steering or braking systems. Otherwise, an accident may
results.
Bundle cables and harnesses with electrical tape or wire ties
to prevent them from interfering with moving parts. If they
should entangle the steering wheel, shift lever or brake pedal,
an accident may result.
•
•
Never supply power to another electrical appliance by splicing
or tapping into this product's power lead(wire). Otherwise, the
current capacity of the wire will be exceeded, resulting in a fire
or electric shock.
When making holes using a drill or similar tool, be sure to wear
protective eyewear. Otherwise, an injury such as loss of
eyesight may result.
•
•
Exposed wires must be insulated with electrical tape.
Otherwise, a short circuit, fire, or electric shock may result.
4
Caution
Play the audio at a moderate volume level that permits you to
hear sounds from outside the car. Driving without being able
to hear outside sounds may result in an accident.
•
•
Keep foreign objects out of the disc slot. They may cause fire
or electrical shock. Another possibility is that discs may be
damaged or become stuck.
Do not stick your fingers or hands into the CD changer
magazine slot. Doing so may cause personal injury.
•
•
•
•
This product must be operated only as on-board equipment,
or it may cause electrical shock or injury.
Do not play distorted sounds for long periods of time;
the speakers may overheat and cause a fire.
This product uses an invisible laser light. In case a problem
develops, be sure to consult the dealer from whom you
purchased the product. Do not disassemble or rebuild the
unit; rebuilding it may expose you and others to a dangerous
laser emission which would damage eyesight or cause an
accident.
For best results, this product should be installed by a
professional installer. Contact the dealer whom you purchased
the product for an appointment.
•
•
When installing this product, be sure to use the supplied
mounting hardware. If parts other than those supplied are
used, the unit may be damaged internally, or may not be held
in place securely and become dislodged.
Avoid installing this product in places where it may get wet,
such as near windows, or in places that are moist or dusty.
Presence of liquid, moisture or dust inside this product can
cause short circuiting, resulting in smoke or fire.
•
5
Caution
Do not install this product in locations where it cannot be
fastened securely, such as places subject to frequent
vibration. Otherwise, it may become dislodged and cause an
accident or injury.
•
If this product is not connected properly, a short circuit, fire or
accident may occur.
•
When routing cables, use care so that they do not contact
sharp metal parts such as brackets or screw tips. Otherwise,
a short circuit, electric shock, fire or accident may result.
•
•
If this product is operated for an excessive period of time, it
may overheat, resulting in a fire. Install the Product so that
heat may dissipate.
Do not obstruct the vent on this product. If blocked, excessive
heat build-up may occure and cause a fire.
•
•
A CLASS 1 LASER PRODUCT label is affixed to the top of
this unit.
6
Table of Contents
Operating precautions ................................................ 8
Notes on operation ........................................................................ 8
About compact discs .................................................................... 9
About cleaning a CD ................................................................... 11
Preparation ................................................................ 12
How to place the disc into the CD magazine ............................... 12
How to place the CD magazine into the changer ......................... 13
How to eject the CD magazine .................................................... 14
Specifications ............................................................ 15
Before Installation ..................................................... 16
Components ............................................................................... 16
Preliminary instruction .................................................................. 17
Daisy chain connection ................................................................ 18
Mounting instruction ................................................. 19
Horizonal instruction .................................................................... 19
Vertical instruction ....................................................................... 23
Connections ................................................................................ 26
System ........................................................................................ 27
This CD changer allows you to select and play continuously your
desired tunes from 8 discs placed in the magazine.
7
Operating precautions
ꢀ Operating precautions
Your CH3083 will perform well over a long period of time through correct
handling and care.
Notes on operation
• For your safety, play only at volume levels that allow outside sounds to
be heard.
• We recommend using with this player a disc
with the logo shown to the left.
• You can play music CDs(CD-R/CD-RW) on
this player. Be sure to use discs that have
been properly processed.
• Depending on the editing equipment used,
some discs may not play properly.
• You cannot play MP3 CD-R/CD-RW discs
on this player.
• Avoid severe mechanical shock.
When the player is subjected to severe
vibration while traveling over a rough
surface, playback may be intermittent.
When a situation like this occurs, resume
playback after returning to a smoother
road.
• About dew condensation.
In cold or rainy weather, just as the interior
glass surface gets fogged, dew (water
condensation) may also settle on the deck.
When this occurs, disc playback may
become intermittent or impossible.
Dehumidify the air in the vehicle for a while
before resuming playback.
8
Operating precautions
About compact discs
• The signal recorded on a compact disc is read by a laser beam, so
nothing touches the disc surface. A scratch on the recorded surface or
a badly warped disc may cause deteriorated sound quality or
intermittent playback. Observe the following precautions to ensure high
quality sound performance:
• Do not stick a piece of paper or tape on,
nor write on or scratch either side of a
disc.
• Discs spin at a high speed inside the
deck. Keep cracked or warped discs out
of the player to avoid damaging it.
• Avoid touching the recorded surface when
handling a disc; handle discs by their
edges.
9
Operating precautions
About brand new CDs
About CD accessories
• You may notice that some brand
new discs are rough around the
center hole or outside edge.
Remove the rough edges with
the side of a ballpoint pen, etc.
Rough edges may prevent
proper loading in the deck.
Flakes from the rough edges
may also stick to the recorded
surface and interfere with
playback.
• Do not use accessories
(stabilizers, protective seals, laser
lens cleaners, etc.) sold for
“improving sound performance”
or “protecting CDs.” The
changes in CD thickness or
outside dimensions made by
these accessories may cause
problems in the player.
Rough Edges
Ballpoint
pen
• Please be sure NOT to attach any
ring-shape protector (or other
accessory) to your discs. Those
protectors are commercially
available and said to protect disc
and to improve sound quality
(and antivibration effect), but they
can do more harm than good in
regular uses. The most common
problems are Insert/Eject related
problems and "No playback"
problems due to the protectorring
that came off in the disc
mechanism.
Rough
Edges
Flakes
Recorded surface
10
Operating precautions
About borrowed CDs
About irregularly-shaped CDs
• Specially-shaped CDs, like
heart-shaped or octagonal CDs,
cannot be played. Do not
attempt to play them, even with
an adapter, since they may
damage the player.
• Do not use a CD with glue or
remnants of adhesive tape or
labels. They may cause the CD
to get stuck inside or damage
the deck.
About cleaning a CD
• Use a commercially available compact disc
cleaner to clean a CD, wiping lightly from
the center to the edge.
• Do not use benzine, thinner, LP record
spray or other cleaners on CDs. They may
damage a CD’s finish.
XXXX
PRECAUTIONS FOR THE CD MAGAZINE
• Do not place the CD magazine on hot place exposed to the sun or in
humid conditions. During summer, the temperature is very high on the
seat or dashboard of a completely closed car. So never leave the CD
magazine in such places.
• Do not drop the CD magazine or treat it roughly.
11
Preparation
ꢀ Preparation
When you listen to a CD with this CD auto changer, please proceed as
follows before playing the CD.
I
How to place the disc into the CD magazine
1
Unloading knob
• Slide a tray out of the CD
magazine.
The magazine holds up to eight
CDs.
CD magazine
It is not necessary to fill all eight
trays. Empty trays are ignored
when played.
Labeled side up
2
• Place the CD on the tray with the
labeled side facing up.
3
• Slide the tray completely back
into the magazine. Otherwise it
may cause failure.
Disc tray
Fix the index label to this surface
Make sure that the tray seats
correctly along the guides on
both sides. Otherwise it may
cause failure.
12
Preparation
I How to place the CD magazine into the
changer
1
• Slide the CD changer door
completely open to the left.
H
V
AX
mM
4x5m
M
2
• Load the magazine into the
CD changer in the direction of
H
the arrow on the top of the
V
AX
M
m
4x5m
M
magazine.
NEVER insert coins, screw drivers or anything other than the
magazine into the magazine slot.
3
• Slide the CD changer door to
the right to close.
H
V
AX
M
m
4x5m
M
Note: You cannot start playing unless the door is fuliy
closed.
13
Preparation
I How to eject the CD magazine
1
• Slide the CD changer door
completely open to the left.
H
V
AX
M
m
4x5m
M
2
• press the eject button
on
the changer to eject the
magazine.
H
V
AX
M
m
4x5m
M
Note: The CD magazine will not be ejected if the door is not
completely open.
About CD MAGAZINE
• Use only the specified CD magazine.
• Up to eight trays (CDs) can fit in the CD magazine.
• When inserting a tray into the CD magazine, make sure that the trays
fit correctly into the racks of the magazine.
• Do not insert two or more CDs into a single rack, otherwise damage
may result.
• Contact the place of purchase for details on the CD-ROM discs that
can be played back using this unit.
14
Specifications
IISpecifications
System
Compact Disc Digital Audio System
Decoding (D/A)
1bit dual D/A converter
Dynamic range
95dB or more(1kHz)
95dB
S/N (IHF-A.1kHz)
Harmonic distortion ratio
Wow/flutter
0.01% at 1kHz
Below measurable limits
2.0V RMS (0dB)
Nominal output level
Line voltage
DC 13.2V (11 to 16V)
about 1.8A max. and less than 600mA
during play.
Current consumption
1
31
9
x
x
x
x
916
"
264
"
732
"
Dimensions (W
Weight
H
D)
x
x
(230 63 185mm)
1.6kg (main unit), 0.2kg (magazine)
Note: The parts constants and circuit are subject to changes
without prior notice for performance improvements.
15
Before installation
N
Before installation
Notes
Be sure to disconnect the vehicle battery's negative
terminal before installing CD changer unit.
N Components
No.
Item
Q'ty
1
2
3
4
5
6
7
8
9
CD changer unit
Base bracket
Side bracket
1
1
2
4
4
3
4
1
1
1
x
Hex bolt (4 8mm)
Hex nut (5mm)
Self-adhesive pad
Cap
Din cable (13P-13P)
Interconnecting cable
Disc magazine, 8 discs
10
16
Before installation
N Preliminary instruction
Before CD changer unit installation, be sure to remove
CAUTION LABEL and TAPE.
Notes
In the event that the unit requires shipping, re-insert the
shipping screws through the caution tag template to help
prevent potential damage that may be caused by shipping.
1
CAUTION LABEL
TAPE
CD CHANGER UNIT
H
V
Fig.1
17
Before installation
N Daisy chain connection
Another CH3083 CD changer can be connected directly to your
CH3083 CD changer in daisy chain.
Both of these CD changers can be connected through the
control unit.
Notes
This switch is set to "H" before shipment.
H
V
H
L
M4x5mmMAX
Daisy Chain
selection switch
1
CD CHANGER
Position of switch
Combination
CD changer (A)
CD changer (B)
CH3083
"L" side
CH3083
"H" side
Main unit + CH3083 (A) + CH3083 (B)
Other than the above
(combination without CD changer)
"H" side
18
Mounting instruction
N
Mounting instruction
N Horizonal instruction
1 . Make sure levers on each side of CD changer unit
are in the "H" position.
NOTE: This levers is set to "H" before shipment.
1
CD CHANGER
H
V
M4x5mmMAX
H
V
Fig.2
19
Mounting instruction
2 . Secure the side brackets on each side of CD
changer unit.
4
HEX BOLTS [x4]
(4x8mm)
H
V
1
CD CHANGER UNIT
3
SIDE BRACKETS [x2]
Fig.3
Notes
• Use the "LH" holes (2 places) at the left of the side bracket
to install the unit.
• Use the "RH" holes (2 places) at the right of the side
bracket to install the unit.
LEFT
RIGHT
LH
RH
LH
RH
V
V
V
V
RH
LH
RH
LH
20
Mounting instruction
3 . Lift the carpet, and choose the mounting location
by placing the base bracket in a safe location.
Remove the papers, then press the base bracket
on the floor panel securely.
LIFT THE CARPET
2
BASE BRACKET
REMOVE THE PAPER
6
SELF-ADHESIVE PAD
Fig.4
4 . Replace the carpet and cut x pattern thru carpet
where the mounting bolts appear. (Fig.5)
5 . Push mounting bolts through a carpet. (Fig.6)
SCREW
CARPET
CARPET
Fig.5
Fig.6
21
Mounting instruction
6 . Install CD changer unit to the base bracket with 4 nuts
provided. Place caps over the mounting bolts.
5
NUTS [x4]
(5mm)
7
CAPS [x4]
1
CD CHANGER
2
BASE BRACKET
Fig.7
22
Mounting instruction
N Vertical instruction
1 . Make sure levers on each side of CD changer unit
are in the "V" position.
NOTE: This levers is set to "H" before shipment.
X
A
M
m
m
5
x
4
M
1
CD CHANGER
Fig.8
23
Mounting instruction
2 . Secure the side brackets on each side of CD
changer unit.
4
HEX BOLTS [x4]
(4x8mm)
V
H
1
CD CHANGER
3
SIDE BRACKETS [x2]
Fig.9
Notes
• Use the "V" holes (2 places) of the side bracket to install
the unit.
COMMON TO RIGHT AND LEFT
LH
RH
V
V
RH
LH
24
Mounting instruction
3 . Lift the carpet, and choose the mounting location
by placing the base bracket in a safe location.
Remove the papers, then press the base bracket
on the floor panel securely.
LIFT THE CARPET
BASE BRACKET
2
REMOVE THE PAPER
6
SELF-ADHESIVE
PAD
Fig.10
4 . Replace the carpet and cut x pattern thru carpet
where the mounting bolts appear. (Fig.11)
5 . Push mounting bolts through a carpet. (Fig.12)
SCREW
CARPET
CARPET
Fig.11
Fig.12
25
Mounting instruction
6 . Install CD changer unit to the base bracket with 4 nuts
provided. Place caps over the mounting bolts.
5
NUTS [x4]
(5mm)
7
CAPS [x4]
X
A
V
M
m
H
m
5
x
4
M
1
CD CHANGER
2
BASE BRACKET
Fig.13
N Connections
Caution
To prevent electrical damage to audio unit, be sure to
ground chassis of external power amplifier to car's body.
• The chassis of an add-on amplifier must be properly
grounded to a nearest metal part of the car's body.
• If the amplifier's chassis is not grounded, the amp's
chassis may possibly generate unwanted electric voltage
(in reference to the car body ground) as the user
operates the audio system. And eventually, this may
possibly lead to an internal damage (electric damage) of
the audio head unit.
26
Mounting instruction
N System
NOTE: Adjust the external amplifier's
input level.
CD3413
①
MAIN UNIT
CH3083
CD CHANGER
CD3413
MAIN UNIT
POWER AMP.
POWER AMP.
②
CH3083
CD CHANGER
CD3413
MAIN UNIT
POWER AMP.
POWER AMP.
③
CH3083
CD CHANGER
CH3083
CD CHANGER
27
Mounting instruction
28
Mounting instruction
29
Mounting instruction
30
CUSTOMER NOTICE
Please retain this booklet and write in the serial number of your CH3083 for
identification.
The serial number is labeled or stamped on the chassis.
Serial No.
DIVISION OF FUJITSU TEN CORP. OF AMERICA
19600 SOUTH VERMONT AVENUE, TORRANCE, CA 90502
(310) 327-2151
090001-1433A700
0508(N.O.)
|