GTO SERIES
Automotive Tweeter Owner’s Manual GTO15T
Tweeter Installation JBL GTO15T
BLACK (–)
(–) SMALL LUG
BLACK
RED (+)
BLACK (–)
RED (+)
RED
3
ROTATE TO AIM
1
(+) LARGE LUG
ANGLED TWEETER
TOWARD LISTENER.
1
SLIDE SCREW UP OR
2
3
DOWN TO ADJUST
TWEETER ANGLE.
2
TIGHTEN NUT AND
WASHER TO LOCK
ANGLE SETTINGS.
1
Figure 3. Surface-mounting the tweeter and
connecting the crossover.
2
4
SECURELY TIGHTEN
THE LARGE HAND NUT.
Figure 4. Mounting the tweeter using the I-Mount™
(patent no. 5,859,917) flush-mounting kit. Also see
Figure 5.
Figure 5. Aiming the tweeter at a desired
listening position.
03
Specifications JBL GTO15T
Type
1" component tweeter
Speaker Impedance
Power Handling:
4 ohms
50W RMS, 150W peak
(with enclosed crossover)
Sensitivity (2.83V, 1m)
Frequency Response
91dB
2.5kHz – 21kHz
General Care:
The loudspeaker grilles may be
cleaned with a damp cloth. Do not
use any cleaners or solvents on the
grilles or the speaker cones.
Declaration of Conformity
We, Harman Consumer International
2, route de Tours
72500 Chateau-du-Loir
FRANCE
JBL Consumer Products • 250 Crossways Park Drive, Woodbury, NY 11797 USA
declare in own responsibility, that the product described in this owner’s manual is in
compliance with technical standards:
©2000 JBL, Incorporated • JBL is a registered trademark of JBL, Incorporated
EN 50081-1:1992
EN 50082-1:1992
Made in USA Printed in USA 3/01
Part No. GTO15TOM3/01
Lutz Uphoff
Harman Consumer International
Chateau-du-Loir, France. 3/01
|