American Standard Outdoor Shower T480507 User Manual

Installation  
Instructions  
T M  
T480.508  
T480.507  
BATH AND SHOWER TRIM KITS  
Thank you for selecting American-Standard...the benchmark  
of fine quality for over 100 years.  
To ensure that your installation proceeds smoothly--  
please read these instructions carefully before you begin.  
Certified to comply with ANSI A112.18.1  
U.S. Patent No. D403,750  
M968698  
RECOMMENDED TOOLS  
Flat Blade Screwdriver  
Phillips Screwdriver  
Adjustable Wrench  
Plumbers' Putty or Caulking  
Teflon Tape  
ROUGHING-IN DIMENSIONS  
FOR REFERENCE ONLY  
1-5/8" TO 3-1/4"  
FINISHED WALL  
1/2" NPT  
4" REF.  
OPTIONAL TO FINISHED  
FLOOR USUALLY  
BETWEEN 65'' AND 78''  
7" REF.  
74" FOR HEAD  
CLEARANCE  
5-1/8" REF.  
4" REF.  
TOP OF TUB RIM  
1/2" COPPER  
BOTTOM OF TUB  
 
ADJUST HOT LIMIT STOP  
3
HOT LIMIT SAFETY STOP ADJUSTMENT  
By restricting handle rotation and limiting the amount of hot water allowed to mix with the cold, the HOT LIMIT SAFETY STOP  
reduces risk of accidental scalding. To set the maximum hot water temperature of your faucets, all you need to do is adjust  
the setting on the HOT LIMIT SAFETY STOP.  
Use a flat blade screwdriver or your fingers to pull up and rotate red HOT LIMIT SAFETY STOP (1). Follow Step "A" or "B" to  
adjust min./max. discharge temperature. "0" being the hottest to "7" the coldest temperature setting. Factory set at "0".  
"A"  
ADJUSTMENT WHEN WATER IS TOO HOT  
PRY RED RING FORWARD AND ROTATE  
COUNTER-CLOCKWISE ONE CLICK  
"A"  
TEMPERATURE SETTING NUMBERS  
"B"  
ADJUSTMENT WHEN WATER IS TOO COLD  
PRY RED RING FORWARD AND ROTATE CLOCKWISE  
"B"  
1
"RED RING"- HOT LIMIT SAFETY STOP  
SERVICE  
4
If faucet drips, operate handle several times from "off" to "on". Do not apply excessive force.  
Clogged CARTRIDGE (4) inlets may cause reduced flow in "full on" hot or cold. To clean inlets, first turn off  
water supply, then:  
Remove HANDLE (1), CAP (2) and CARTRIDGE (4). Clean inlets  
and MANIFOLD (5).  
Reassemble CARTRIDGE (4), alternately tightening SCREWS (3).  
Replace CAP (2) and HANDLE (1). Check flow.  
1
2
4
3
5
CARE:  
DO: SIMPLY RINSE THE PRODUCT CLEAN WITH CLEAR WATER. DRY WITH A SOFT COTTON FLANNEL CLOTH.  
DO NOT: DO NOT CLEAN THE PRODUCT WITH SOAPS, ACID, POLISH, ABRASIVES, HARSH CLEANERS, OR A  
CLOTH WITH A COARSE SURFACE.  
M968698  
 

Abocom Network Router GP1000DM User Manual
AD Blood Pressure Monitor 2 Plus User Manual
Air King Fan 4CH68G User Manual
Airstream Clothes Dryer PNEG 339 User Manual
Alto Shaam Microwave Oven 1767 SK III User Manual
Aluratek Network Card AHDDS100F User Manual
Amcor Air Conditioner CF14000E User Manual
Avet Reels Fishing Equipment QUAD T RX 50 2 User Manual
Behringer Headphones UL2000M User Manual
Behringer Stereo System FEX800 User Manual